Laser Cut Acrylic / Birch Plywood Letters
Laser Cut Acrylic or Birch Plywood Letters - Boat names and other uses - laser cut from either 3mm Acrylic or 3mm Birch Plywood. Will come with a template to assist in aligning. If we do not have the colour you need listed, then please contact us.
Please be aware that some of our fonts make the lowercase letters appear as capitals, therefore please make sure you are happy with the image in the preview display BEFORE ordering. The design is for one only, for more than one of the designs, you need to change the quantity at the bottom.
We strongly advise you to read our Letter Height Guide - if sizes are critical we recommend you contact us with your requirements for a sized/scaled proof.
Lettering comes without fixings - you will need to use a suitable glue or tape for your application.
 |
Laser Cut Acrylic or Birch Plywood Letters - Boat names and other uses - laser cut from either 3mm Acrylic or 3mm Birch Plywood. The designs will come with a template to assist in aligning. If we do not have the colour you need listed, then please contact us. Please be aware that some of our fonts make the lowercase letters appear as capitals, therefore please make sure you are happy with the image in the preview display BEFORE ordering. The design is for one only, for more than one of the designs, you need to change the quantity at the bottom. We strongly advise you to read our Letter Height Guide - if sizes are critical we recommend you contact us with your requirements for a sized/scaled proof. Lettering comes without fixings - you will need to use a suitable glue or tape for your application. |
| Condition | New |
|---|---|
| Manufacturer | Vinyl Cut Graphics |
| Extra Information | Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |